How to fit the vacuum hose sleeve on your Mirka dust extractor

Written by Matti Rossi

Last published at: July 6th, 2021
  1. Open the velcro strap of the cord sleeve.
  2. Fully open the zipper of the cord sleeve
  3. Insert the end of the vacuum hose into the sleeve and pull it through.
  4. Take the power cord and insert it through the pocket inside the sleeve.
  5. Zip the sleeve carefully, making sure the cord won’t get caught in the zipper.
  6. Guide the power cord through the pocket in the other end
  7. Fully close the zipper and close the velcro strap in the other end
  8. The power cord goes under the strap.

All done!

Here you can watch a how-to video.