Updated August 31st, 2021 by Susann Heikkilä

How long does charging a battery take

Mirka cordless tools use rechargeable Li-ion batteries which are mounted in the tool handle.Two battery versions are available, 2.5 Ah and 5.0 Ah.It takes around 45 minutes for the smaller battery to achieve full charge, the bigger battery needs double the time.Battery charge can be monitored using the myMirka app.We advise not to store the batterie...

0 min reading time
Updated August 31st, 2021 by Susann Heikkilä

Can I use my PS 1437 Polisher for sanding

The Mirka® PS 1437 polisher can be used for sanding when a dust suction hood and a special backing pad are added.The solution works perfectly for various coarse sanding applications, e.g. paint removal. The hood is easily attached to PS 1437 without needing a key, working together for dust-free sanding when combined with Abranet® Ace HD.The front se...

0 min reading time
Updated August 31st, 2021 by Susann Heikkilä

Does the DEOS Delta 663 come with an interface

An interface is not included with the Mirka DEOS Delta 663 but can be purchased separately.The 7 mm thick interface is designed to make it easier to sand rounded and contoured surfaces and for some users it will add extra comfort while working. The interface is available in single packs and 5-packs. Size: 100x152x152mm 32HMirkacode: 8295901211  1/Pa...

0 min reading time
Updated August 31st, 2021 by Susann Heikkilä

Which dust bags fit my extractor

Mirka 1025L Dust extractor Requires dust bag Mirka code 8999000211 Mirka 1230L (PC) Dust ExtractorMirka 1230M (AFC) Dust ExtractorMirka 1230M 110v (PC) Dust extractor Requires dust bag Mirka code 8999100211 Not sure how to change a dust bag? We have a short video to demonstrate....

0 min reading time
Updated April 8th, 2022 by Susann Heikkilä

How do I connect my tool to the myMirka app

Please note that in some countries the full version of myMirka and Bluetooth are not available. Mirka® DEOS Electric Sander 1. Connect the power cord to a mains outlet.2. Press and hold the rpm+ button while switching on the power button.3. The left LED starts blinking, to indicate that Bluetooth is active Pair your device 1. Open the myMirka app; c...

1 min reading time
Updated May 26th, 2021 by Susann Heikkilä

How much surface pressure does the Mirka AIROS create

The Mirka AIROS usually creates around 40 Newton of surface pressure. For more details in specific applications, please contact Mirka specialists....

0 min reading time
Updated August 31st, 2021 by Susann Heikkilä

How to repair a broken cable on Mirka DEROS/DEOS/LEROS?

Over time, the cables on Mirka DEROS, DEOS and LEROS tools might break due to wear and tear. To address this matter, Mirka shifted from molded cables to cables with rewireable connectors on these tools. This means the cable connectors can be changed by the user themselves, without need for special training. The rewireable connector also enables repa...

0 min reading time
Updated August 31st, 2021 by Susann Heikkilä

How to sand a wooden exterior wall

Before a new coat of paint can be applied on a wall, the old paint must be removed as thoroughly as possible, preferably with a machine. For large areas we recommend the LEROS random orbital sander and for tighter spaces, the smaller DEROS. We recommend testing different coarseness levels on a small area first. The Mirka Abranet and Abranet Ace HD n...

0 min reading time
Load More